8086 Support - Manual: vi

PROLOG

This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the corresponding Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux.

NAME

vi - screen-oriented (visual) display editor

SYNOPSIS

vi [-rR][-c command][-t tagstring][-w size][file ...]

DESCRIPTION

This utility shall be provided on systems that both support the User Portability Utilities option and define the POSIX2_CHAR_TERM symbol. On other systems it is optional.

The vi (visual) utility is a screen-oriented text editor. Only the open and visual modes of the editor are described in IEEE Std 1003.1-2001; see the line editor ex for additional editing capabilities used in vi. The user can switch back and forth between vi and ex and execute ex commands from within vi.

This reference page uses the term edit buffer to describe the current working text. No specific implementation is implied by this term. All editing changes are performed on the edit buffer, and no changes to it shall affect any file until an editor command writes the file.

When using vi, the terminal screen acts as a window into the editing buffer. Changes made to the editing buffer shall be reflected in the screen display; the position of the cursor on the screen shall indicate the position within the editing buffer.

Certain terminals do not have all the capabilities necessary to support the complete vi definition. When these commands cannot be supported on such terminals, this condition shall not produce an error message such as "not an editor command" or report a syntax error. The implementation may either accept the commands and produce results on the screen that are the result of an unsuccessful attempt to meet the requirements of this volume of IEEE Std 1003.1-2001 or report an error describing the terminal-related deficiency.

OPTIONS

The vi utility shall conform to the Base Definitions volume of IEEE Std 1003.1-2001, Section 12.2, Utility Syntax Guidelines.

The following options shall be supported:

-c command: See the ex command description of the -c option.
-r: See the ex command description of the -r option.
-R: See the ex command description of the -R option.
-t tagstring: See the ex command description of the -t option.
-w size: See the ex command description of the -w option.

OPERANDS

See the OPERANDS section of the ex command for a description of the operands supported by the vi command.

STDIN

If standard input is not a terminal device, the results are undefined. The standard input consists of a series of commands and input text, as described in the EXTENDED DESCRIPTION section.

If a read from the standard input returns an error, or if the editor detects an end-of-file condition from the standard input, it shall be equivalent to a SIGHUP asynchronous event.

INPUT FILES

See the INPUT FILES section of the ex command for a description of the input files supported by the vi command.

ENVIRONMENT VARIABLES

See the ENVIRONMENT VARIABLES section of the ex command for the environment variables that affect the execution of the vi command.

ASYNCHRONOUS EVENTS

See the ASYNCHRONOUS EVENTS section of the ex for the asynchronous events that affect the execution of the vi command.

STDOUT

If standard output is not a terminal device, undefined results occur.

Standard output may be used for writing prompts to the user, for informational messages, and for writing lines from the file.

STDERR

If standard output is not a terminal device, undefined results occur.

The standard error shall be used only for diagnostic messages.

OUTPUT FILES

See the OUTPUT FILES section of the ex command for a description of the output files supported by the vi command.

EXTENDED DESCRIPTION

If the terminal does not have the capabilities necessary to support an unspecified portion of the vi definition, implementations shall start initially in ex mode or open mode. Otherwise, after initialization, vi shall be in command mode; text input mode can be entered by one of several commands used to insert or change text. In text input mode, <ESC> can be used to return to command mode; other uses of <ESC> are described later in this section; see Terminate Command or Input Mode .

Initialization in ex and vi

See Initialization in ex and vi for a description of ex and vi initialization for the vi utility.

Command Descriptions in vi

The following symbols are used in this reference page to represent arguments to commands.

buffer: See the description of buffer in the EXTENDED DESCRIPTION section of the ex utility; see Command Descriptions in ex .

In open and visual mode, when a command synopsis shows both [ buffer] and [ count] preceding the command name, they can be specified in either order.

count: A positive integer used as an optional argument to most commands, either to give a repeat count or as a size. This argument is optional and shall default to 1 unless otherwise specified.

The Synopsis lines for the vi commands <control>-G, <control>-L, <control>-R, <control>-], %, &, ^, D, m, M, Q, u, U, and ZZ do not have count as an optional argument. Regardless, it shall not be an error to specify a count to these commands, and any specified count shall be ignored.

motion: An optional trailing argument used by the !, <, >, c, d, and y commands, which is used to indicate the region of text that shall be affected by the command. The motion can be either one of the command characters repeated or one of several other vi commands (listed in the following table). Each of the applicable commands specifies the region of text matched by repeating the command; each command that can be used as a motion command specifies the region of text it affects.

Commands that take motion arguments operate on either lines or characters, depending on the circumstances. When operating on lines, all lines that fall partially or wholly within the text region specified for the command shall be affected. When operating on characters, only the exact characters in the specified text region shall be affected. Each motion command specifies this individually.

When commands that may be motion commands are not used as motion commands, they shall set the current position to the current line and column as specified.

The following commands shall be valid cursor motion commands:

<apostrophe>       (    -    j    H
<carriage-return>  )    $    k    L
<comma>            [[   %    l    M
<control>-H        ]]   _    n    N
<control>-N        {    ;    t    T
<control>-P        }    ?    w    W
<grave accent>     ^    b    B
<newline>          +    e    E
<space>            |    f    F
<zero>             /    h    G

Any count that is specified to a command that has an associated motion command shall be applied to the motion command. If a count is applied to both the command and its associated motion command, the effect shall be multiplicative.

The following symbols are used in this section to specify locations in the edit buffer:

current character

The character that is currently indicated by the cursor.

end of a line

The point located between the last non- <newline> (if any) and the terminating <newline> of a line. For an empty line, this location coincides with the beginning of the line.

end of the edit buffer

The location corresponding to the end of the last line in the edit buffer.

The following symbols are used in this section to specify command actions:

bigword

In the POSIX locale, vi shall recognize four kinds of bigwords:

1.: A maximal sequence of non- <blank>s preceded and followed by <blank>s or the beginning or end of a line or the edit buffer

2.: One or more sequential blank lines

3.: The first character in the edit buffer

4.: The last non- <newline> in the edit buffer

word

In the POSIX locale, vi shall recognize five kinds of words:

1.

A maximal sequence of letters, digits, and underscores, delimited at both ends by:

*: Characters other than letters, digits, or underscores

*: The beginning or end of a line

*: The beginning or end of the edit buffer

2.

A maximal sequence of characters other than letters, digits, underscores, or <blank>s, delimited at both ends by:

*: A letter, digit, underscore

*: <blank>s

*: The beginning or end of a line

*: The beginning or end of the edit buffer

3.: One or more sequential blank lines

4.: The first character in the edit buffer

5.: The last non- <newline> in the edit buffer

section boundary

A section boundary is one of the following:

1.: A line whose first character is a <form-feed>

2.: A line whose first character is an open curly brace ( '{' )

3.: A line whose first character is a period and whose second and third characters match a two-character pair in the sections edit option (see ed)

4.: A line whose first character is a period and whose only other character matches the first character of a two-character pair in the sections edit option, where the second character of the two-character pair is a <space>

5.: The first line of the edit buffer

6.: The last line of the edit buffer if the last line of the edit buffer is empty or if it is a ]] or } command; otherwise, the last non- <newline> of the last line of the edit buffer

paragraph boundary

A paragraph boundary is one of the following:

1.: A section boundary

2.: A line whose first character is a period and whose second and third characters match a two-character pair in the paragraphs edit option (see ed)

3.: A line whose first character is a period and whose only other character matches the first character of a two-character pair in the paragraphs edit option, where the second character of the two-character pair is a <space>

4.: One or more sequential blank lines

remembered search direction

See the description of remembered search direction in ed.

sentence boundary

A sentence boundary is one of the following:

1.: A paragraph boundary

2.: The first non- <blank> that occurs after a paragraph boundary

3.: The first non- <blank> that occurs after a period ( '.' ), exclamation mark ( '!' ), or question mark ( '?' ), followed by two <space>s or the end of a line; any number of closing parenthesis ( ')' ), closing brackets ( ']' ), double quote ( ' ),' or single quote ( '" ) characters can appear between the punctuation mark and the two <space>s or end-of-line

In the remainder of the description of the vi utility, the term "buffer line" refers to a line in the edit buffer and the term "display line" refers to the line or lines on the display screen used to display one buffer line. The term "current line" refers to a specific "buffer line".

If there are display lines on the screen for which there are no corresponding buffer lines because they correspond to lines that would be after the end of the file, they shall be displayed as a single tilde ( '~' ) character, plus the terminating <newline>.

The last line of the screen shall be used to report errors or display informational messages. It shall also be used to display the input for "line-oriented commands" ( /, ?, :, and !). When a line-oriented command is executed, the editor shall enter text input mode on the last line on the screen, using the respective command characters as prompt characters. (In the case of the ! command, the associated motion shall be entered by the user before the editor enters text input mode.) The line entered by the user shall be terminated by a <newline>, a non- <control>-V-escaped <carriage-return>, or unescaped <ESC>. It is unspecified if more characters than require a display width minus one column number of screen columns can be entered.

If any command is executed that overwrites a portion of the screen other than the last line of the screen (for example, the ex suspend or ! commands), other than the ex shell command, the user shall be prompted for a character before the screen is refreshed and the edit session continued.

<tab>s shall take up the number of columns on the screen set by the tabstop edit option (see ed), unless there are less than that number of columns before the display margin that will cause the displayed line to be folded; in this case, they shall only take up the number of columns up to that boundary.

The cursor shall be placed on the current line and relative to the current column as specified by each command described in the following sections.

In open mode, if the current line is not already displayed, then it shall be displayed.

In visual mode, if the current line is not displayed, then the lines that are displayed shall be expanded, scrolled, or redrawn to cause an unspecified portion of the current line to be displayed. If the screen is redrawn, no more than the number of display lines specified by the value of the window edit option shall be displayed (unless the current line cannot be completely displayed in the number of display lines specified by the window edit option) and the current line shall be positioned as close to the center of the displayed lines as possible (within the constraints imposed by the distance of the line from the beginning or end of the edit buffer). If the current line is before the first line in the display and the screen is scrolled, an unspecified portion of the current line shall be placed on the first line of the display. If the current line is after the last line in the display and the screen is scrolled, an unspecified portion of the current line shall be placed on the last line of the display.

In visual mode, if a line from the edit buffer (other than the current line) does not entirely fit into the lines at the bottom of the display that are available for its presentation, the editor may choose not to display any portion of the line. The lines of the display that do not contain text from the edit buffer for this reason shall each consist of a single '@' character.

In visual mode, the editor may choose for unspecified reasons to not update lines in the display to correspond to the underlying edit buffer text. The lines of the display that do not correctly correspond to text from the edit buffer for this reason shall consist of a single '@' character (plus the terminating <newline>), and the <control>-R command shall cause the editor to update the screen to correctly represent the edit buffer.

Open and visual mode commands that set the current column set it to a column position in the display, and not a character position in the line. In this case, however, the column position in the display shall be calculated for an infinite width display; for example, the column related to a character that is part of a line that has been folded onto additional screen lines will be offset from the display line column where the buffer line begins, not from the beginning of a particular display line.

The display cursor column in the display is based on the value of the current column, as follows, with each rule applied in turn:

1.: If the current column is after the last display line column used by the displayed line, the display cursor column shall be set to the last display line column occupied by the last non- <newline> in the current line; otherwise, the display cursor column shall be set to the current column.

2.

If the character of which some portion is displayed in the display line column specified by the display cursor column requires more than a single display line column:

a.: If in text input mode, the display cursor column shall be adjusted to the first display line column in which any portion of that character is displayed.

b.: Otherwise, the display cursor column shall be adjusted to the last display line column in which any portion of that character is displayed.

The current column shall not be changed by these adjustments to the display cursor column.

If an error occurs during the parsing or execution of a vi command:

*: The terminal shall be alerted. Execution of the vi command shall stop, and the cursor (for example, the current line and column) shall not be further modified.

*: Unless otherwise specified by the following command sections, it is unspecified whether an informational message shall be displayed.

*: Any partially entered vi command shall be discarded.

*: If the vi command resulted from a map expansion, all characters from that map expansion shall be discarded, except as otherwise specified by the map command (see ed).

*: If the vi command resulted from the execution of a buffer, no further commands caused by the execution of the buffer shall be executed.

Page Backwards

Synopsis:

[count] <control>-B

If in open mode, the <control>-B command shall behave identically to the z command. Otherwise, if the current line is the first line of the edit buffer, it shall be an error.

If the window edit option is less than 3, display a screen where the last line of the display shall be some portion of:

(current first line) -1

otherwise, display a screen where the first line of the display shall be some portion of:

(current first line) - count x ((window edit option) -2)

If this calculation would result in a line that is before the first line of the edit buffer, the first line of the display shall display some portion of the first line of the edit buffer.

Current line: If no lines from the previous display remain on the screen, set to the last line of the display; otherwise, set to ( line - the number of new lines displayed on this screen).

Current column: Set to non- <blank>.

Scroll Forward

Synopsis:

[count] <control>-D

If the current line is the last line of the edit buffer, it shall be an error.

If no count is specified, count shall default to the count associated with the previous <control>-D or <control>-U command. If there was no previous <control>-D or <control>-U command, count shall default to the value of the scroll edit option.

If in open mode, write lines starting with the line after the current line, until count lines or the last line of the file have been written.

Current line: If the current line + count is past the last line of the edit buffer, set to the last line of the edit buffer; otherwise, set to the current line + count.

Current column: Set to non- <blank>.

Scroll Forward by Line

Synopsis:

[count] <control>-E

Display the line count lines after the last line currently displayed.

If the last line of the edit buffer is displayed, it shall be an error. If there is no line count lines after the last line currently displayed, the last line of the display shall display some portion of the last line of the edit buffer.

Current line: Unchanged if the previous current character is displayed; otherwise, set to the first line displayed.

Current column: Unchanged.

Page Forward

Synopsis:

[count] <control>-F

If in open mode, the <control>-F command shall behave identically to the z command. Otherwise, if the current line is the last line of the edit buffer, it shall be an error.

If the window edit option is less than 3, display a screen where the first line of the display shall be some portion of:

(current last line) +1

otherwise, display a screen where the first line of the display shall be some portion of:

(current first line) + count x ((window edit option) -2)

If this calculation would result in a line that is after the last line of the edit buffer, the last line of the display shall display some portion of the last line of the edit buffer.

Current line: If no lines from the previous display remain on the screen, set to the first line of the display; otherwise, set to ( line + the number of new lines displayed on this screen).

Current column: Set to non- <blank>.

Display Information

Synopsis:

<control>-G

This command shall be equivalent to the ex file command.

Move Cursor Backwards

Synopsis:

[count] <control>-H

[count] h

the current erase character (see stty)

If there are no characters before the current character on the current line, it shall be an error. If there are less than count previous characters on the current line, count shall be adjusted to the number of previous characters on the line.

If used as a motion command:

1.: The text region shall be from the character before the starting cursor up to and including the countth character before the starting cursor.

2.: Any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Unchanged.

Current column: Set to ( column - the number of columns occupied by count characters ending with the previous current column).

Move Down

Synopsis:

[count] <newline>

[count] <control>-J

[count] <control>-M

[count] <control>-N

[count] j

[count] <carriage-return>

[count] +

If there are less than count lines after the current line in the edit buffer, it shall be an error.

If used as a motion command:

1.: The text region shall include the starting line and the next count - 1 lines.

2.: Any text copied to a buffer shall be in line mode.

If not used as a motion command:

Current line: Set to current line+ count.

Current column: Set to non- <blank> for the <carriage-return>, <control>-M, and + commands; otherwise, unchanged.

Clear and Redisplay

Synopsis:

<control>-L

If in open mode, clear the screen and redisplay the current line. Otherwise, clear and redisplay the screen.

Current line: Unchanged.

Current column: Unchanged.

Move Up

Synopsis:

[count] <control>-P

[count] k

[count] -

If there are less than count lines before the current line in the edit buffer, it shall be an error.

If used as a motion command:

1.: The text region shall include the starting line and the previous count lines.

2.: Any text copied to a buffer shall be in line mode.

If not used as a motion command:

Current line: Set to current line - count.

Current column: Set to non- <blank> for the - command; otherwise, unchanged.

Redraw Screen

Synopsis:

<control>-R

If any lines have been deleted from the display screen and flagged as deleted on the terminal using the @ convention (see the beginning of the EXTENDED DESCRIPTION section), they shall be redisplayed to match the contents of the edit buffer.

It is unspecified whether lines flagged with @ because they do not fit on the terminal display shall be affected.

Current line: Unchanged.

Current column: Unchanged.

Scroll Backward

Synopsis:

[count] <control>-U

If the current line is the first line of the edit buffer, it shall be an error.

Current line: If count is greater than the current line, set to 1; otherwise, set to the current line - count.

Current column: Set to non- <blank>.

Scroll Backward by Line

Synopsis:

[count] <control>-Y

Display the line count lines before the first line currently displayed.

If the current line is the first line of the edit buffer, it shall be an error. If this calculation would result in a line that is before the first line of the edit buffer, the first line of the display shall display some portion of the first line of the edit buffer.

Current line: Unchanged if the previous current character is displayed; otherwise, set to the first line displayed.

Current column: Unchanged.

Edit the Alternate File

Synopsis:

<control>-^

This command shall be equivalent to the ex edit command, with the alternate pathname as its argument.

Terminate Command or Input Mode

Synopsis:

<ESC>

If a partial vi command (as defined by at least one, non- count character) has been entered, discard the count and the command character(s).

Otherwise, if no command characters have been entered, and the <ESC> was the result of a map expansion, the terminal shall be alerted and the <ESC> character shall be discarded, but it shall not be an error.

Otherwise, it shall be an error.

Current line: Unchanged.

Current column: Unchanged.

Search for tagstring

Synopsis:

<control>-]

If the current character is not a word or <blank>, it shall be an error.

This command shall be equivalent to the ex tag command, with the argument to that command defined as follows.

If the current character is a <blank>:

1.: Skip all <blank>s after the cursor up to the end of the line.

2.: If the end of the line is reached, it shall be an error.

Then, the argument to the ex tag command shall be the current character and all subsequent characters, up to the first non-word character or the end of the line.

Move Cursor Forward

Synopsis:

[count] <space>

[count] l  (ell)

If there are less than count non- <newline>s after the cursor on the current line, count shall be adjusted to the number of non- <newline>s after the cursor on the line.

If used as a motion command:

1.: If the current or countth character after the cursor is the last non- <newline> in the line, the text region shall be comprised of the current character up to and including the last non- <newline> in the line. Otherwise, the text region shall be from the current character up to, but not including, the countth character after the cursor.

2.: Any text copied to a buffer shall be in character mode.

If not used as a motion command:

If there are no non- <newline>s after the current character on the current line, it shall be an error.

Current line: Unchanged.

Current column: Set to the last column that displays any portion of the countth character after the current character.

Replace Text with Results from Shell Command

Synopsis:

[count] ! motion shell-commands <newline>

If the motion command is the ! command repeated:

1.: If the edit buffer is empty and no count was supplied, the command shall be the equivalent of the ex :read ! command, with the text input, and no text shall be copied to any buffer.

2.

Otherwise:

a.: If there are less than count -1 lines after the current line in the edit buffer, it shall be an error.

b.: The text region shall be from the current line up to and including the next count -1 lines.

Otherwise, the text region shall be the lines in which any character of the text region specified by the motion command appear.

Any text copied to a buffer shall be in line mode.

This command shall be equivalent to the ex ! command for the specified lines.

Move Cursor to End-of-Line

Synopsis:

[count] $

It shall be an error if there are less than ( count -1) lines after the current line in the edit buffer.

If used as a motion command:

1.

If count is 1:

a.: It shall be an error if the line is empty.

b.: Otherwise, the text region shall consist of all characters from the starting cursor to the last non- <newline> in the line, inclusive, and any text copied to a buffer shall be in character mode.

2.: Otherwise, if the starting cursor position is at or before the first non- <blank> in the line, the text region shall consist of the current and the next count -1 lines, and any text saved to a buffer shall be in line mode.

3.: Otherwise, the text region shall consist of all characters from the starting cursor to the last non- <newline> in the line that is count -1 lines forward from the current line, and any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Set to the current line + count-1.

Current column: The current column is set to the last display line column of the last non- <newline> in the line, or column position 1 if the line is empty.

The current column shall be adjusted to be on the last display line column of the last non- <newline> of the current line as subsequent commands change the current line, until a command changes the current column.

Move to Matching Character

Synopsis:

If the character at the current position is not a parenthesis, bracket, or curly brace, search forward in the line to the first one of those characters. If no such character is found, it shall be an error.

The matching character shall be the parenthesis, bracket, or curly brace matching the parenthesis, bracket, or curly brace, respectively, that was at the current position or that was found on the current line.

Matching shall be determined as follows, for an open parenthesis:

1.: Set a counter to 1.

2.: Search forwards until a parenthesis is found or the end of the edit buffer is reached.

3.: If the end of the edit buffer is reached, it shall be an error.

4.: If an open parenthesis is found, increment the counter by 1.

5.: If a close parenthesis is found, decrement the counter by 1.

6.: If the counter is zero, the current character is the matching character.

Matching for a close parenthesis shall be equivalent, except that the search shall be backwards, from the starting character to the beginning of the buffer, a close parenthesis shall increment the counter by 1, and an open parenthesis shall decrement the counter by 1.

Matching for brackets and curly braces shall be equivalent, except that searching shall be done for open and close brackets or open and close curly braces. It is implementation-defined whether other characters are searched for and matched as well.

If used as a motion command:

1.: If the matching cursor was after the starting cursor in the edit buffer, and the starting cursor position was at or before the first non- <blank> non- <newline> in the starting line, and the matching cursor position was at or after the last non- <blank> non- <newline> in the matching line, the text region shall consist of the current line to the matching line, inclusive, and any text copied to a buffer shall be in line mode.

2.: If the matching cursor was before the starting cursor in the edit buffer, and the starting cursor position was at or after the last non- <blank> non- <newline> in the starting line, and the matching cursor position was at or before the first non- <blank> non- <newline> in the matching line, the text region shall consist of the current line to the matching line, inclusive, and any text copied to a buffer shall be in line mode.

3.: Otherwise, the text region shall consist of the starting character to the matching character, inclusive, and any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Set to the line where the matching character is located.

Current column: Set to the last column where any portion of the matching character is displayed.

Repeat Substitution

Synopsis:

Repeat the previous substitution command. This command shall be equivalent to the ex & command with the current line as its addresses, and without options, count, or flags.

Return to Previous Context at Beginning of Line

Synopsis:

' character

It shall be an error if there is no line in the edit buffer marked by character.

If used as a motion command:

1.: If the starting cursor is after the marked cursor, then the locations of the starting cursor and the marked cursor in the edit buffer shall be logically swapped.

2.: The text region shall consist of the starting line up to and including the marked line, and any text copied to a buffer shall be in line mode.

If not used as a motion command:

Current line: Set to the line referenced by the mark.

Current column: Set to non- <blank>.

Return to Previous Context

Synopsis:

` character

It shall be an error if the marked line is no longer in the edit buffer. If the marked line no longer contains a character in the saved numbered character position, it shall be as if the marked position is the first non- <blank>.

If used as a motion command:

1.: It shall be an error if the marked cursor references the same character in the edit buffer as the starting cursor.

2.: If the starting cursor is after the marked cursor, then the locations of the starting cursor and the marked cursor in the edit buffer shall be logically swapped.

3.: If the starting line is empty or the starting cursor is at or before the first non- <blank> non- <newline> of the starting line, and the marked cursor line is empty or the marked cursor references the first character of the marked cursor line, the text region shall consist of all lines containing characters from the starting cursor to the line before the marked cursor line, inclusive, and any text copied to a buffer shall be in line mode.

4.: Otherwise, if the marked cursor line is empty or the marked cursor references a character at or before the first non- <blank> non- <newline> of the marked cursor line, the region of text shall be from the starting cursor to the last non- <newline> of the line before the marked cursor line, inclusive, and any text copied to a buffer shall be in character mode.

5.: Otherwise, the region of text shall be from the starting cursor (inclusive), to the marked cursor (exclusive), and any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Set to the line referenced by the mark.

Current column: Set to the last column in which any portion of the character referenced by the mark is displayed.

Return to Previous Section

Synopsis:

[count] [[

Move the cursor backward through the edit buffer to the first character of the previous section boundary, count times.

If used as a motion command:

1.: If the starting cursor was at the first character of the starting line or the starting line was empty, and the first character of the boundary was the first character of the boundary line, the text region shall consist of the current line up to and including the line where the countth next boundary starts, and any text copied to a buffer shall be in line mode.

2.: If the boundary was the last line of the edit buffer or the last non- <newline> of the last line of the edit buffer, the text region shall consist of the last character in the edit buffer up to and including the starting character, and any text saved to a buffer shall be in character mode.

3.: Otherwise, the text region shall consist of the starting character up to but not including the first character in the countth next boundary, and any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Set to the line where the countth next boundary in the edit buffer starts.

Current column: Set to the last column in which any portion of the first character of the countth next boundary is displayed, or column position 1 if the line is empty.

Move to Next Section

Synopsis:

[count] ]]

Move the cursor forward through the edit buffer to the first character of the next section boundary, count times.

If used as a motion command:

1.: If the starting cursor was at the first character of the starting line or the starting line was empty, and the first character of the boundary was the first character of the boundary line, the text region shall consist of the current line up to and including the line where the countth previous boundary starts, and any text copied to a buffer shall be in line mode.

2.: If the boundary was the first line of the edit buffer, the text region shall consist of the first character in the edit buffer up to but not including the starting character, and any text copied to a buffer shall be in character mode.

3.: Otherwise, the text region shall consist of the first character in the countth previous section boundary up to but not including the starting character, and any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Set to the line where the countth previous boundary in the edit buffer starts.

Current column: Set to the last column in which any portion of the first character of the countth previous boundary is displayed, or column position 1 if the line is empty.

Move to First Non-<blank> Position on Current Line

Synopsis:

If used as a motion command:

1.

If the line has no non- <blank> non- <newline>s, or if the cursor is at the first non- <blank> non- <newline> of the line, it shall be an error.

2.: If the cursor is before the first non- <blank> non- <newline> of the line, the text region shall be comprised of the current character, up to, but not including, the first non- <blank> non- <newline> of the line.

3.: If the cursor is after the first non- <blank> non- <newline> of the line, the text region shall be from the character before the starting cursor up to and including the first non- <blank> non- <newline> of the line.

4.: Any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Unchanged.

Current column: Set to non- <blank>.

Current and Line Above

Synopsis:

[count] _

If there are less than count -1 lines after the current line in the edit buffer, it shall be an error.

If used as a motion command:

1.: If count is less than 2, the text region shall be the current line.

2.: Otherwise, the text region shall include the starting line and the next count -1 lines.

3.: Any text copied to a buffer shall be in line mode.

If not used as a motion command:

Current line: Set to current line + count -1.

Current column: Set to non- <blank>.

Move Back to Beginning of Sentence

Synopsis:

[count] (

Move backward to the beginning of a sentence. This command shall be equivalent to the [[ command, with the exception that sentence boundaries shall be used instead of section boundaries.

Move Forward to Beginning of Sentence

Synopsis:

[count] )

Move forward to the beginning of a sentence. This command shall be equivalent to the ]] command, with the exception that sentence boundaries shall be used instead of section boundaries.

Move Back to Preceding Paragraph

Synopsis:

[count] {

Move back to the beginning of the preceding paragraph. This command shall be equivalent to the [[ command, with the exception that paragraph boundaries shall be used instead of section boundaries.

Move Forward to Next Paragraph

Synopsis:

[count] }

Move forward to the beginning of the next paragraph. This command shall be equivalent to the ]] command, with the exception that paragraph boundaries shall be used instead of section boundaries.

Move to Specific Column Position

Synopsis:

[count] |

For the purposes of this command, lines that are too long for the current display and that have been folded shall be treated as having a single, 1-based, number of columns.

If there are less than count columns in which characters from the current line are displayed on the screen, count shall be adjusted to be the last column in which any portion of the line is displayed on the screen.

If used as a motion command:

1.: If the line is empty, or the cursor character is the same as the character on the countth column of the line, it shall be an error.

2.: If the cursor is before the countth column of the line, the text region shall be comprised of the current character, up to but not including the character on the countth column of the line.

3.: If the cursor is after the countth column of the line, the text region shall be from the character before the starting cursor up to and including the character on the countth column of the line.

4.: Any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Unchanged.

Current column: Set to the last column in which any portion of the character that is displayed in the count column of the line is displayed.

Reverse Find Character

Synopsis:

[count] ,

If the last F, f, T, or t command was F, f, T, or t, this command shall be equivalent to an f, F, t, or T command, respectively, with the specified count and the same search character.

If there was no previous F, f, T, or t command, it shall be an error.

Repeat

Synopsis:

[count] .

Repeat the last !, <, >, A, C, D, I, J, O, P, R, S, X, Y, a, c, d, i, o, p, r, s, x, y, or ~ command. It shall be an error if none of these commands have been executed. Commands (other than commands that enter text input mode) executed as a result of map expansions, shall not change the value of the last repeatable command.

Repeated commands with associated motion commands shall repeat the motion command as well; however, any specified count shall replace the count(s) that were originally specified to the repeated command or its associated motion command.

If the motion component of the repeated command is f, F, t, or T, the repeated command shall not set the remembered search character for the ; and , commands.

If the repeated command is p or P, and the buffer associated with that command was a numeric buffer named with a number less than 9, the buffer associated with the repeated command shall be set to be the buffer named by the name of the previous buffer logically incremented by 1.

If the repeated character is a text input command, the input text associated with that command is repeated literally:

*: Input characters are neither macro or abbreviation-expanded.

*: Input characters are not interpreted in any special way with the exception that <newline>, <carriage-return>, and <control>-T behave as described in Input Mode Commands in vi .

Current line: Set as described for the repeated command.

Current column: Set as described for the repeated command.

Find Regular Expression

Synopsis:

If the input line contains no non- <newline>s, it shall be equivalent to a line containing only the last regular expression encountered. The enhanced regular expressions supported by vi are described in Regular Expressions in ex .

Otherwise, the line shall be interpreted as one or more regular expressions, optionally followed by an address offset or a vi z command.

If the regular expression is not the last regular expression on the line, or if a line offset or z command is specified, the regular expression shall be terminated by an unescaped '/' character, which shall not be used as part of the regular expression. If the regular expression is not the first regular expression on the line, it shall be preceded by zero or more <blank>s, a semicolon, zero or more <blank>s, and a leading '/' character, which shall not be interpreted as part of the regular expression. It shall be an error to precede any regular expression with any characters other than these.

Each search shall begin from the character after the first character of the last match (or, if it is the first search, after the cursor). If the wrapscan edit option is set, the search shall continue to the character before the starting cursor character; otherwise, to the end of the edit buffer. It shall be an error if any search fails to find a match, and an informational message to this effect shall be displayed.

An optional address offset (see Addressing in ex ) can be specified after the last regular expression by including a trailing '/' character after the regular expression and specifying the address offset. This offset will be from the line containing the match for the last regular expression specified. It shall be an error if the line offset would indicate a line address less than 1 or greater than the last line in the edit buffer. An address offset of zero shall be supported. It shall be an error to follow the address offset with any other characters than <blank>s.

If not used as a motion command, an optional z command (see Redraw Window ) can be specified after the last regular expression by including a trailing '/' character after the regular expression, zero or more <blank>s, a 'z' , zero or more <blank>s, an optional new window edit option value, zero or more <blank>s, and a location character. The effect shall be as if the z command was executed after the / command. It shall be an error to follow the z command with any other characters than <blank>s.

The remembered search direction shall be set to forward.

If used as a motion command:

1.: It shall be an error if the last match references the same character in the edit buffer as the starting cursor.

2.: If any address offset is specified, the last match shall be adjusted by the specified offset as described previously.

3.: If the starting cursor is after the last match, then the locations of the starting cursor and the last match in the edit buffer shall be logically swapped.

4.: If any address offset is specified, the text region shall consist of all lines containing characters from the starting cursor to the last match line, inclusive, and any text copied to a buffer shall be in line mode.

5.: Otherwise, if the starting line is empty or the starting cursor is at or before the first non- <blank> non- <newline> of the starting line, and the last match line is empty or the last match starts at the first character of the last match line, the text region shall consist of all lines containing characters from the starting cursor to the line before the last match line, inclusive, and any text copied to a buffer shall be in line mode.

6.: Otherwise, if the last match line is empty or the last match begins at a character at or before the first non- <blank> non- <newline> of the last match line, the region of text shall be from the current cursor to the last non- <newline> of the line before the last match line, inclusive, and any text copied to a buffer shall be in character mode.

7.: Otherwise, the region of text shall be from the current cursor (inclusive), to the first character of the last match (exclusive), and any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: If a match is found, set to the last matched line plus the address offset, if any; otherwise, unchanged.

Current column: Set to the last column on which any portion of the first character in the last matched string is displayed, if a match is found; otherwise, unchanged.

Move to First Character in Line

Synopsis:

0  (zero)

Move to the first character on the current line. The character '0' shall not be interpreted as a command if it is immediately preceded by a digit.

If used as a motion command:

1.: If the cursor character is the first character in the line, it shall be an error.

2.: The text region shall be from the character before the cursor character up to and including the first character in the line.

3.: Any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Unchanged.

Current column: The last column in which any portion of the first character in the line is displayed, or if the line is empty, unchanged.

Execute an ex Command

Synopsis:

Execute one or more ex commands.

If any portion of the screen other than the last line of the screen was overwritten by any ex command (except shell), vi shall display a message indicating that it is waiting for an input from the user, and shall then read a character. This action may also be taken for other, unspecified reasons.

If the next character entered is a ':' , another ex command shall be accepted and executed. Any other character shall cause the screen to be refreshed and vi shall return to command mode.

Current line: As specified for the ex command.

Current column: As specified for the ex command.

Repeat Find

Synopsis:

[count] ;

This command shall be equivalent to the last F, f, T, or t command, with the specified count, and with the same search character used for the last F, f, T, or t command. If there was no previous F, f, T, or t command, it shall be an error.

Shift Left

Synopsis:

[count] < motion

If the motion command is the < command repeated:

1.: If there are less than count -1 lines after the current line in the edit buffer, it shall be an error.

2.: The text region shall be from the current line, up to and including the next count -1 lines.

Shift any line in the text region specified by the count and motion command one shiftwidth (see the ex shiftwidth option) toward the start of the line, as described by the ex < command. The unshifted lines shall be copied to the unnamed buffer in line mode.

Current line: If the motion was from the current cursor position toward the end of the edit buffer, unchanged. Otherwise, set to the first line in the edit buffer that is part of the text region specified by the motion command.

Current column: Set to non- <blank>.

Shift Right

Synopsis:

[count] > motion

If the motion command is the > command repeated:

1.: If there are less than count -1 lines after the current line in the edit buffer, it shall be an error.

2.: The text region shall be from the current line, up to and including the next count -1 lines.

Shift any line with characters in the text region specified by the count and motion command one shiftwidth (see the ex shiftwidth option) away from the start of the line, as described by the ex > command. The unshifted lines shall be copied into the unnamed buffer in line mode.

Current column: Set to non- <blank>.

Scan Backwards for Regular Expression

Synopsis:

Scan backwards; the ? command shall be equivalent to the / command (see Find Regular Expression ) with the following exceptions:

1.: The input prompt shall be a '?' .

2.: Each search shall begin from the character before the first character of the last match (or, if it is the first search, the character before the cursor character).

3.: The search direction shall be from the cursor toward the beginning of the edit buffer, and the wrapscan edit option shall affect whether the search wraps to the end of the edit buffer and continues.

4.: The remembered search direction shall be set to backward.

Execute

Synopsis:

@buffer

If the buffer is specified as @, the last buffer executed shall be used. If no previous buffer has been executed, it shall be an error.

Behave as if the contents of the named buffer were entered as standard input. After each line of a line-mode buffer, and all but the last line of a character mode buffer, behave as if a <newline> were entered as standard input.

If an error occurs during this process, an error message shall be written, and no more characters resulting from the execution of this command shall be processed.

If a count is specified, behave as if that count were entered as user input before the characters from the @ buffer were entered.

Current line: As specified for the individual commands.

Current column: As specified for the individual commands.

Reverse Case

Synopsis:

[count] ~

Reverse the case of the current character and the next count -1 characters, such that lowercase characters that have uppercase counterparts shall be changed to uppercase characters, and uppercase characters that have lowercase counterparts shall be changed to lowercase characters, as prescribed by the current locale. No other characters shall be affected by this command.

If there are less than count -1 characters after the cursor in the edit buffer, count shall be adjusted to the number of characters after the cursor in the edit buffer minus 1.

For the purposes of this command, the next character after the last non- <newline> on the line shall be the next character in the edit buffer.

Current line: Set to the line including the ( count-1)th character after the cursor.

Current column: Set to the last column in which any portion of the ( count-1)th character after the cursor is displayed.

Append

Synopsis:

[count] a

Enter text input mode after the current cursor position. No characters already in the edit buffer shall be affected by this command. A count shall cause the input text to be appended count -1 more times to the end of the input.

Current line/column: As specified for the text input commands (see Input Mode Commands in vi ).

Append at End-of-Line

Synopsis:

[count] A

This command shall be equivalent to the vi command:

$ [ count ] a

(see Append ).

Move Backward to Preceding Word

Synopsis:

[count] b

With the exception that words are used as the delimiter instead of bigwords, this command shall be equivalent to the B command.

Move Backward to Preceding Bigword

Synopsis:

[count] B

If the edit buffer is empty or the cursor is on the first character of the edit buffer, it shall be an error. If less than count bigwords begin between the cursor and the start of the edit buffer, count shall be adjusted to the number of bigword beginnings between the cursor and the start of the edit buffer.

If used as a motion command:

1.: The text region shall be from the first character of the countth previous bigword beginning up to but not including the cursor character.

2.: Any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Set to the line containing the current column.

Current column: Set to the last column upon which any part of the first character of the countth previous bigword is displayed.

Change

Synopsis:

[buffer][count] c motion

If the motion command is the c command repeated:

1.: The buffer text shall be in line mode.

2.: If there are less than count -1 lines after the current line in the edit buffer, it shall be an error.

3.: The text region shall be from the current line up to and including the next count -1 lines.

Otherwise, the buffer text mode and text region shall be as specified by the motion command.

The replaced text shall be copied into buffer, if specified, and into the unnamed buffer. If the text to be replaced contains characters from more than a single line, or the buffer text is in line mode, the replaced text shall be copied into the numeric buffers as well.

If the buffer text is in line mode:

1.: Any lines that contain characters in the region shall be deleted, and the editor shall enter text input mode at the beginning of a new line which shall replace the first line deleted.

2.: If the autoindent edit option is set, autoindent characters equal to the autoindent characters on the first line deleted shall be inserted as if entered by the user.

Otherwise, if characters from more than one line are in the region of text:

1.: The text shall be deleted.

2.: Any text remaining in the last line in the text region shall be appended to the first line in the region, and the last line in the region shall be deleted.

3.: The editor shall enter text input mode after the last character not deleted from the first line in the text region, if any; otherwise, on the first column of the first line in the region.

Otherwise:

1.: If the glyph for '$' is smaller than the region, the end of the region shall be marked with a '$' .

2.: The editor shall enter text input mode, overwriting the region of text.

Current line/column: As specified for the text input commands (see Input Mode Commands in vi ).

Change to End-of-Line

Synopsis:

[buffer][count] C

This command shall be equivalent to the vi command:

[buffer][count] c$

See the c command.

Delete

Synopsis:

[buffer][count] d motion

If the motion command is the d command repeated:

1.: The buffer text shall be in line mode.

2.: If there are less than count -1 lines after the current line in the edit buffer, it shall be an error.

3.: The text region shall be from the current line up to and including the next count -1 lines.

Otherwise, the buffer text mode and text region shall be as specified by the motion command.

If in open mode, and the current line is deleted, and the line remains on the display, an '@' character shall be displayed as the first glyph of that line.

Delete the region of text into buffer, if specified, and into the unnamed buffer. If the text to be deleted contains characters from more than a single line, or the buffer text is in line mode, the deleted text shall be copied into the numeric buffers, as well.

Current line: Set to the first text region line that appears in the edit buffer, unless that line has been deleted, in which case it shall be set to the last line in the edit buffer, or line 1 if the edit buffer is empty.

Current column:

1.: If the line is empty, set to column position 1.

2.

Otherwise, if the buffer text is in line mode or the motion was from the cursor toward the end of the edit buffer:

a.: If a character from the current line is displayed in the current column, set to the last column that displays any portion of that character.

b.: Otherwise, set to the last column in which any portion of any character in the line is displayed.

3.: Otherwise, if a character is displayed in the column that began the text region, set to the last column that displays any portion of that character.

4.: Otherwise, set to the last column in which any portion of any character in the line is displayed.

Delete to End-of-Line

Synopsis:

[buffer] D

Delete the text from the current position to the end of the current line; equivalent to the vi command:

[buffer] d$

Move to End-of-Word

Synopsis:

[count] e

With the exception that words are used instead of bigwords as the delimiter, this command shall be equivalent to the E command.

Move to End-of-Bigword

Synopsis:

[count] E

If the edit buffer is empty it shall be an error. If less than count bigwords end between the cursor and the end of the edit buffer, count shall be adjusted to the number of bigword endings between the cursor and the end of the edit buffer.

If used as a motion command:

1.: The text region shall be from the last character of the countth next bigword up to and including the cursor character.

2.: Any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Set to the line containing the current column.

Current column: Set to the last column upon which any part of the last character of the countth next bigword is displayed.

Find Character in Current Line (Forward)

Synopsis:

[count] f character

It shall be an error if count occurrences of the character do not occur after the cursor in the line.

If used as a motion command:

1.: The text range shall be from the cursor character up to and including the countth occurrence of the specified character after the cursor.

2.: Any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Unchanged.

Current column: Set to the last column in which any portion of the countth occurrence of the specified character after the cursor appears in the line.

Find Character in Current Line (Reverse)

Synopsis:

[count] F character

It shall be an error if count occurrences of the character do not occur before the cursor in the line.

If used as a motion command:

1.: The text region shall be from the countth occurrence of the specified character before the cursor, up to, but not including the cursor character.

2.: Any text copied to a buffer shall be in character mode.

If not used as a motion command:

Current line: Unchanged.

Current column: Set to the last column in which any portion of the countth occurrence of the specified character before the cursor appears in the line.

Move to Line

Synopsis:

[count] G

If count is not specified, it shall default to the last line of the edit buffer. If count is greater than the last line of the edit buffer, it shall be an error.

If used as a motion command:

1.: The text region shall be from the cursor line up to and including the specified line.

2.: Any text copied to a buffer shall be in line mode.

If not used as a motion command:

Current line: Set to count if count is specified; otherwise, the last line.

Current column: Set to non- <blank>.

Move to Top of Screen

Synopsis:

[count] H

If the beginning of the line count greater than the first line of which any portion appears on the display does not exist, it shall be an error.

If used as a motion command:

1.: If in open mode, the text region shall be the current line.

2.: Otherwise, the text region shall be from the starting line up to and including (the first line of the display + count -1).

3.: Any text copied to a buffer shall be in line mode.

If not used as a motion command:

If in open mode, this command shall set the current column to non- <blank> and do nothing else.

Otherwise, it shall set the current line and current column as follows.

Current line: Set to (the first line of the display + count -1).

Current column: Set to non- <blank>.

Insert Before Cursor

Synopsis:

[count] i

Enter text input mode before the current cursor position. No characters already in the edit buffer shall be affected by this command. A count shall cause the input text to be appended count -1 more times to the end of the input.

Current line/column: As specified for the text input commands (see Input Mode Commands in vi ).

Insert at Beginning of Line

Synopsis:

[count] I

This command shall be equivalent to the vi command ^[ count] i.

Join

Synopsis:

[count] J

If the current line is the last line in the edit buffer, it shall be an error.

This command shall be equivalent to the ex join command with no addresses, and an ex command count value of 1 if count was not specified or if a count of 1 was specified, and an ex command count value of count -1 for any other value of count, except that the current line and column shall be set as follows.

Current line: Unchanged.

Current column: The last column in which any portion of the character following the last character in the initial line is displayed, or the last non- <newline> in the line if no characters were appended.

Move to Bottom of Screen

Synopsis:

[count] L

If the beginning of the line count less than the last line of which any portion appears on the display does not exist, it shall be an error.

If used as a motion command:

1.: If in open mode, the text region shall be the current line.

2.: Otherwise, the text region shall include all lines from the starting cursor line to (the last line of the display -( count -1)).

3.: Any text copied to a buffer shall be in line mode.

If not used as a motion command:

1.: If in open mode, this command shall set the current column to non- <blank> and do nothing else.

2.: Otherwise, it shall set the current line and current column as follows.

Current line: Set to (the last line of the display -( count -1)).

Current column: Set to non- <blank>.

Mark Position

Synopsis:

m letter

This command shall be equivalent to the ex mark command with the specified character as an argument.

Move to Middle of Screen

Synopsis:

The middle line of the display shall be calculated as follows:

(the top line of the display) + (((number of lines displayed) +1) /2) -1

If used as a motion command:

1.: If in open mode, the text region shall be the current line.

2.: Otherwise, the text region shall include all lines from the starting cursor line up to and including the middle line of the display.

3.: Any text copied to a buffer shall be in line mode.

If not used as a motion command:

If in open mode, this command shall set the current column to non- <blank> and do nothing else.

Otherwise, it shall set the current line and current column as follows.

Current line: Set to the middle line of the display.

Current column: Set to non- <blank>.

Repeat Regular Expression Find (Forward)

Synopsis:

If the remembered search direction was forward, the n command shall be equivalent to the vi / command with no characters entered by the user. Otherwise, it shall be equivalent to the vi ? command with no characters entered by the user.

If the n command is used as a motion command for the ! command, the editor shall not enter text input mode on the last line on the screen, and shall behave as if the user entered a single '!' character as the text input.

Repeat Regular Expression Find (Reverse)

Synopsis:

Scan for the next match of the last pattern given to / or ?, but in the reverse direction; this is the reverse of n.

If the remembered search direction was forward, the N command shall be equivalent to the vi ? command with no characters entered by the user. Otherwise, it shall be equivalent to the vi / command with no characters entered by the user. If the N command is used as a motion command for the ! command, the editor shall not enter text input mode on the last line on the screen, and shall behave as if the user entered a single ! character as the text input.

Insert Empty Line Below

Synopsis:

Enter text input mode in a new line appended after the current line. A count shall cause the input text to be appended count -1 more times to the end of the already added text, each time starting on a new, appended line.

Current line/column: As specified for the text input commands (see Input Mode Commands in vi ).

Insert Empty Line Above

Synopsis:

Enter text input mode in a new line inserted before the current line. A count shall cause the input text to be appended count -1 more times to the end of the already added text, each time starting on a new, appended line.

Current line/column: As specified for the text input commands (see Input Mode Commands in vi ).

Put from Buffer Following

Synopsis:

[buffer] p

If no buffer is specified, the unnamed buffer shall be used.

If the buffer text is in line mode, the text shall be appended below the current line, and each line of the buffer shall become a new line in the edit buffer. A count shall cause the buffer text to be appended count -1 more times to the end of the already added text, each time starting on a new, appended line.

If the buffer text is in character mode, the text shall be appended into the current line after the cursor, and each line of the buffer other than the first and last shall become a new line in the edit buffer. A count shall cause the buffer text to be appended count -1 more times to the end of the already added text, each time starting after the last added character.

Current line: If the buffer text is in line mode, set the line to line +1; otherwise, unchanged.

Current column: If the buffer text is in line mode:

1.: If there is a non- <blank> in the first line of the buffer, set to the last column on which any portion of the first non- <blank> in the line is displayed.

2.: If there is no non- <blank> in the first line of the buffer, set to the last column on which any portion of the last non- <newline> in the first line of the buffer is displayed.

If the buffer text is in character mode:

1.: If the text in the buffer is from more than a single line, then set to the last column on which any portion of the first character from the buffer is displayed.

2.: Otherwise, if the buffer is the unnamed buffer, set to the last column on which any portion of the last character from the buffer is displayed.

3.: Otherwise, set to the first column on which any portion of the first character from the buffer is displayed.

Put from Buffer Before

Synopsis:

[buffer] P

If no buffer is specified, the unnamed buffer shall be used.

If the buffer text is in line mode, the text shall be inserted above the current line, and each line of the buffer shall become a new line in the edit buffer. A count shall cause the buffer text to be appended count -1 more times to the end of the already added text, each time starting on a new, appended line.

If the buffer text is in character mode, the text shall be inserted into the current line before the cursor, and each line of the buffer other than the first and last shall become a new line in the edit buffer. A count shall cause the buffer text to be appended count -1 more times to the end of the already added text, each time starting after the last added character.

Current line: Unchanged.

Current column: If the buffer text is in line mode:

1.: If there is a non- <blank> in the first line of the buffer, set to the last column on which any portion of that character is displayed.

2.: If there is no non- <blank> in the first line of the buffer, set to the last column on which any portion of the last non- <newline> in the first line of the buffer is displayed.

If the buffer text is in character mode:

1.: If the buffer is the unnamed buffer, set to the last column on which any portion of the last character from the buffer is displayed.

2.: Otherwise, set to the first column on which any portion of the first character from the buffer is displayed.

Enter ex Mode

Synopsis:

Leave visual or open mode and enter ex command mode.