All categories
Add new FAQ
Add question
Open questions
Login
Sign up
Login
Search
Advanced search
Questions in Cluster HAT
Page
2
out of
2
Pages
How do I enable mDNS/zeroconf/Bonjour on Armbian?
To allow <hostname>.local domains to be resolved on Armbian install the following. sudo apt-get install avahi-daemon libnss-mdns libnss-mymachines You should then be
4703 views
How do I setup NAT on the WiFi interface on the rpiboot test images?
WARNING: These steps relate to the OLD test rpiboot (only) images and NOT the current combined images, if you want
4057 views
How do I enable autologin on TTY running on the Controllers serial port [Raspbian Stretch]?
To enable auto logins on the TTY running on any serial port on the Controller log in and run the
4359 views
How do I copy SSH keys to P1-P4 when using usbboot/rpiboot?
Since the filesystems for P1-P4 are stored on the Controller it's even easier to setup SSH keys to log into
6753 views
[LEGACY] Guide to using the RPIBOOT [test] image on the Cluster HAT/Zero Dongle / Zero Stem or just a USB cable.
See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone. Cluster
29467 views
[LEGACY] How do I setup usbboot (no SD cards in the Pi Zeros) for the Cluster HAT?
See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone. I
20059 views
How do I create and copy the SSH key from the Controller Pi to the Pi Zeros to allow passwordless logins?
Assuming you haven't already created a public/private key on the Controller Pi run the following. ssh-keygen -t rsa Newer Raspberry Pi OS
9447 views
How do I enable autologin on TTY running on the Gadget Mode serial port?
The Cluster HAT allows you to log into the Pi Zeros via the (Gadget USB) Serial port, sometimes it's helpful
5380 views
⇤
←
1
2
Hardware
Cluster HAT
Cluster HAT
Subcategories