11 search results

• 
  How do I copy SSH keys to P1-P4 when using usbboot/rpiboot?
  Since the filesystems for P1-P4 are stored on the Controller it's even easier to setup SSH keys to log into ...
• 
  How do I USBBOOT Pi Zero/Pi Zero 2 without SD cards (Cluster HAT/Cluster CTRL)?
  With the Cluster CTRL images (linked from the ClusterHAT website) it's now possible to mix/match booting nodes (Pi Zeros/Compute Modules/A+) ...
• 
  ClusterCTRL: How to write an image to the eMMC?
  To write an image to the eMMC on a Compute Module you need to boot it as a USB Device ...
• 
  ClusterCTRL: How do I boot a Compute Module from eMMC?
  To boot a Compute Module from the eMMC USBBOOT must be disabled. If your Compute Module doesn't already have a bootable ...
• 
  ClusterCTRL: How do I USBBOOT a Compute Module?
  To boot a Compute Module as a USB device USBBOOT must be enabled. Background When using ClusterCTRL with Compute Modules "clusterctrl status" ...
• 
  ClusterCTRL: How do I USBBOOT a Compute Module and use eMMC as local storage/swap?
  A Compute Module will boot as a USB device if either USBBOOT is enabled or it can't find bootcode.txt in ...
• 
  What does the output of 'clusterctrl status' mean?
  Running "clusterctrl status" you will get output similar to the below text. clusterhat:1 clusterctrl:2 maxpi:10 ctrl_bus:20:4:3 21:3:3 hat_version:1.2 hat_version_major:1 hat_version_minor:2 hat_size:4 hat_uuid:622aef87-17d6-4022-a370-781e1c3fe2b9 hat_vendor:8086 Consultancy hat_product_id:0x0004 throttled:0x0 hat_alert:0 p1:0 p2:0 p3:0 p4:0 ctrl20:FW:1.1 ADC1:5014mV T1:18.60C p5:0 u5:1 p6:0 u6:1 p7:0 u7:1 ctrl21:FW:1.1 ADC1:4891mV T1:23.52C p8:0 u8:1 p9:0 u9:1 p10:0 u10:1 clusterhat:False if no ...
• 
  How are nodes numbered with Cluster CTRL/Cluster HAT (resolve order conflict)?
  The pX number of a node for control is set by it's priority (this might not be the same as ...
• 
  How do I write new firmware to Cluster Triple?
  Control of the Cluster Triple is done using an ATmega328P (or ATmega328PB), the IC can be reprogrammed using either a standard ...
• 
  How do I manually install clusterctrl?
  If you're using one of the provided ClusterCTRL images the cluserctrl tool will already be installed but those using the ...
• 
  How do I use newer NCM images on older (bookworm) controllers?
  Images dated 2025-11-24-2 and earlier use the ACM+RNDIS protocols for the USB Gadget Ethernet. Images 2025-11-24-3 and later use ACM+NCM. ...