7 search results

• Software / Linux
  How do I alter the kernel cmdline and rebuild grub2 on CentOS 7?
    The kernel command line (cmdline) can be edited in "/etc/default/grub" (GRUB_CMDLINE_LINUX).   Once edited you will need to rebuild the config for grub2 ...
• Hardware / Cluster HAT / Cluster CTRL
  [LEGACY] How do I setup usbboot (no SD cards in the Pi Zeros) for the
  See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone. I ...
• Hardware / Cluster HAT / Cluster CTRL
  ClusterCTRL: How to write an image to the eMMC?
  To write an image to the eMMC on a Compute Module you need to boot it as a USB Device ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I change a Cluster HAT image type (Controller/NAT/P1/P2/P3/P4/etc.)?
  If you're using an newer style Cluster CTRL image (the file /etc/default/clusterctrl exists) please follow Cluster CTRL instructions. On the Cluster ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I change a Cluster CTRL image type (Controller/NAT/P1/P2/P3/P4/etc.)?
  If you're using an older style Cluster HAT image (if you have /etc/default/clusterctrl then you're using the new style), follow ...
• Hardware / Cluster HAT / Cluster CTRL
  [LEGACY] Guide to using the RPIBOOT [test] image on the Cluster HAT/Zero Dongle / Zero
  See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone.   Cluster ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I setup NAT on the WiFi interface on the rpiboot test images?
  WARNING: These steps relate to the OLD test rpiboot (only) images and NOT the current combined images, if you want ...