Here you can see questions asked by other users. If you answer these questions, your answers may be inserted into the FAQ.
| Date / User | Category / Question |
|---|---|
|
2017-08-31 Matha |
Software:
Is it possible to use the ClusterHAT with SD cards attached to each Pi Zero (x4)? I would prefer to use standard images and then customize per recommendations.
|
|
2018-03-12 lutz |
Cluster HAT / Cluster CTRL:
clusterHAT v2.2
rpiboot with 4 zeros (no W)
works fine, but no luck using GPIO e.g.
(sudo) gpio write 21 1 or 0
|
|
2018-04-13 Brian |
Cluster HAT / Cluster CTRL:
How do you get kubernetes running on the controller with a version in which the pi zero nodes can be added?
|
|
2020-08-21 Masayuki Codec |
Cluster HAT / Cluster CTRL:
Hi,
I have one cluster hat and one cluster triple connecting to a raspberry pi 2.
Those are clusterctrl status result. I think it gives me strange result.
pi@cbridge:~ $ clusterctrl status
clusterhat:1
clusterctrl:1
maxpi:7
ctrl_bus:20:11:3
hat_version:1.2
hat_version_major:1
hat_version_minor:2
hat_size:4
hat_uuid:622aef87-17d6-4022-a370-781e1c3fe2b9
hat_vendor:8086 Consultancy
hat_product_id:0x0004
throttled:0x0
hat_alert:0
p1:0
p2:0
p3:0
p4:0
ctrl20:FW:1.3 ADC1:4904mV T1:21.06C
p1:0
u1:1
p2:0
u2:1
p3:0
u3:1
It looks like the nodes name on cluster hat p1 is same as nodes on cluster triple p1.
How can I change those names ?
Thank you.
|
|
2022-03-18 joe |
Cluster HAT / Cluster CTRL:
Can you add support for the zero 2 w to usbboot, please?
|
|
2022-10-05 Quinn |
Hardware:
USB PCI Passthrough?
Is it possible to pass a usb port through to one of the Pi Zero's on the clusterhat?
|
|
2022-12-11 Vítězslav Dvořák |
Software:
How to reconfigure if I have p1-p4 in first controller, p5-p8 in second, etc. to have a unique MAC address on each controller ?
|