8 search results

• Software / Linux
  How do I setup CentOS 7 for KVM Virtualisation with a bridged network [OVH/Hetzner]?
  Coming from a minimal install the first step is to install the required software # yum install net-tools qemu-kvm libvirt virt-install ...
• Hardware / Cluster HAT / Cluster CTRL
  [LEGACY] Guide to using the RPIBOOT [test] image on the Cluster HAT/Zero Dongle / Zero
  See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone.   Cluster ...
• Software / Linux / Command Line
  How do I use a static network device name for KVM (to graph in Cacti
  To force a static (pre-defined name for a KVM Virtual Machine you will need to edit the configuration file for ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I change a Cluster HAT image type (Controller/NAT/P1/P2/P3/P4/etc.)?
  If you're using an newer style Cluster CTRL image (the file /etc/default/clusterctrl exists) please follow Cluster CTRL instructions. On the Cluster ...
• Hardware / Cluster HAT / Cluster CTRL
  Troubleshooting missing Pi Zeros in a ClusterHAT
  If you've got the Cluster HAT connected and you're having problems with one or more Pi Zeros not being visible ...
• Hardware / Cluster HAT / Cluster CTRL
  Can the Pi Zero 2 W be used in the Cluster HAT with a Pi5/Pi4?
  When using a Pi 5 and 4x Pi Zero 2 with the official 27W Pi 5 I wouldn't expect any ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I use newer NCM images on older (bookworm) controllers?
  Images dated 2025-11-24-2 and earlier use the ACM+RNDIS protocols for the USB Gadget Ethernet. Images 2025-11-24-3 and later use ACM+NCM. ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I change a Cluster CTRL image type (Controller/NAT/P1/P2/P3/P4/etc.)?
  If you're using an older style Cluster HAT image (if you have /etc/default/clusterctrl then you're using the new style), follow ...