20 search results

• Hardware / Cluster HAT / Cluster CTRL
  ClusterCTRL: How to write an image to the eMMC?
  To write an image to the eMMC on a Compute Module you need to boot it as a USB Device ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I USBBOOT Pi Zero/Pi Zero 2 without SD cards (Cluster HAT/Cluster CTRL)?
  With the Cluster CTRL images (linked from the ClusterHAT website) it's now possible to mix/match booting nodes (Pi Zeros/Compute Modules/A+) ...
• Hardware
  How to I setup a login prompt using the USB-USB Null Modem?
  To allow you to login to a Linux machine over the USB-USB Null Modem a getty needs to be ran ...
• Software / Linux / Command Line
  ClusterCTRL: How do I boot a Compute Module from eMMC?
  To boot a Compute Module from the eMMC USBBOOT must be disabled. If your Compute Module doesn't already have a bootable ...
• Software / Hosting Control Panels
  How do I log the connection IP in qmail (H-Sphere)?
  In versions newer than H-Sphere 2.5 Patch 1 you can increase the logging level by editing the "/var/qmail/control/options" file. Simply ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I enable autologin on TTY running on the Gadget Mode serial port?
  The Cluster HAT allows you to log into the Pi Zeros via the (Gadget USB) Serial port, sometimes it's helpful ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I copy SSH keys to P1-P4 when using usbboot/rpiboot?
  Since the filesystems for P1-P4 are stored on the Controller it's even easier to setup SSH keys to log into ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I enable autologin on TTY running on the Controllers serial port [Raspbian Stretch]?
  To enable auto logins on the TTY running on any serial port on the Controller log in and run the ...
• Software / Linux / Command Line
  How do I enable autologin on TTY running on the Controllers serial port [Raspbian Buster/Bullseye/Bookworm]?
  To enable auto logins on the TTY running on any serial port on the Controller log in and run the ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I update the firmware on ClusterHAT v2.6?
  The ClusterHAT v2.6 uses an ATtiny1616 to emulate the XRA1200P I/O expander, to update the firmware using the built-in UPDI programmer ...
• Software / Hosting Control Panels
  How do I recalculate Plesk statistics for a site?
  If for some reason Plesk does not update the statistics properly for a site or you wish to re-run them ...
• Software / Microsoft Windows
  Unable to login to Windows Virtual PC with error "Unable to log you on because
  This can be caused by the user account not having a password set. This will only cause problems when "Integration Features" ...
• Software / Hosting Control Panels
  How do I log into SmarterStats as the admin?
  To login into Smarter Stats as the admin user you need to use:   Site ID: admin Username: admin Password: <your password> You should now ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I create and copy the SSH key from the Controller Pi to the
  Assuming you haven't already created a public/private key on the Controller Pi run the following. ssh-keygen -t rsa Newer Raspberry Pi OS ...
• Hardware / Cluster HAT / Cluster CTRL
  [LEGACY] Guide to using the RPIBOOT [test] image on the Cluster HAT/Zero Dongle / Zero
  See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone.   Cluster ...
• Software / Linux / Command Line
  ClusterCTRL: How do I USBBOOT a Compute Module and use eMMC as local storage/swap?
  A Compute Module will boot as a USB device if either USBBOOT is enabled or it can't find bootcode.txt in ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I write new firmware to Cluster Triple?
  Control of the Cluster Triple is done using an ATmega328P (or ATmega328PB), the IC can be reprogrammed using either a standard ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I write new firmware to Cluster Stack?
  Control of the ClusterCTRL Stackis done using an ATmega328P (or ATmega328PB), the IC can be reprogrammed using either a standard ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I write new firmware to Cluster Triple
  Control of the Cluster Triple is done using an ATmega328P (or ATmega328PB), the IC can be reprogrammed using either a ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I write new firmware to Cluster Stack
  Control of the ClusterCTRL Stackis done using an ATmega328P (or ATmega328PB), the IC can be reprogrammed using either a standard ...