43 search results

Page 1 out of 43 search results

• Hardware / VoIP
  How do I factory reset a Siemens Gigaset A580IP / C475IP / S685IP
  To remove all settings from the phone (It will revert back to DHCP and a default pin of 0000).   Remove the ...
• Software / Linux / Manuals
  Manual: vi
  PROLOG This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the ...
• Software / Linux / Manuals
  Manual: ps
    PROLOG This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the ...
• Software / Linux / Command Line
  How do I view the expiry date of an SSL certificate?
  To view the expiry dates of an SSL certificate simply run openssl x509 -noout -in <filename> -dates Which will output data in ...
• Software / Hosting Control Panels
  My Softaculous licence is showing as expired but I've renewed it.
  To force Softaculous to re-check the licence you will need to run the cron, for cPanel servers this is as ...
• Software / Linux
  How do I stop an automatic raid check?
  MD (software) raid checks are performed every Sunday at 1am on Centos6 systems, to stop a current raid check you ...
• Software / Linux / Command Line
  How do I see the progress of a dd?
  To view the current position of a dd you need to send signal SIGUSR1 You can either find the pid of ...
• Software / Linux
  How do I recompile the kernel (and install those missing modules) on the Iteaduino Plus?
  Install the required packages to recompile the kernel with (logged in as root) and prepare the directory for the source ...
• Software / Linux / Command Line
  How do I setup VNC for a user on Centos 7?
  To setup your server to run a full desktop VNC session first we need to install the required packages. yum groupinstall ...
• Software / Linux / Command Line
  How do I use a static network device name for KVM (to graph in Cacti
  To force a static (pre-defined name for a KVM Virtual Machine you will need to edit the configuration file for ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I enable autologin on TTY running on the Gadget Mode serial port?
  The Cluster HAT allows you to log into the Pi Zeros via the (Gadget USB) Serial port, sometimes it's helpful ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I create and copy the SSH key from the Controller Pi to the
  Assuming you haven't already created a public/private key on the Controller Pi run the following. ssh-keygen -t rsa Newer Raspberry Pi OS ...
• Hardware / Cluster HAT / Cluster CTRL
  [LEGACY] How do I setup usbboot (no SD cards in the Pi Zeros) for the
  See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone. I ...
• Hardware / Cluster HAT / Cluster CTRL
  [LEGACY] Guide to using the RPIBOOT [test] image on the Cluster HAT/Zero Dongle / Zero
  See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone.   Cluster ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I copy SSH keys to P1-P4 when using usbboot/rpiboot?
  Since the filesystems for P1-P4 are stored on the Controller it's even easier to setup SSH keys to log into ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I enable autologin on TTY running on the Controllers serial port [Raspbian Stretch]?
  To enable auto logins on the TTY running on any serial port on the Controller log in and run the ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I setup NAT on the WiFi interface on the rpiboot test images?
  WARNING: These steps relate to the OLD test rpiboot (only) images and NOT the current combined images, if you want ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I USBBOOT Pi Zero/Pi Zero 2 without SD cards (Cluster HAT/Cluster CTRL)?
  With the Cluster CTRL images (linked from the ClusterHAT website) it's now possible to mix/match booting nodes (Pi Zeros/Compute Modules/A+) ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I change a Cluster CTRL image type (Controller/NAT/P1/P2/P3/P4/etc.)?
  If you're using an older style Cluster HAT image (if you have /etc/default/clusterctrl then you're using the new style), follow ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I change a Cluster HAT image type (Controller/NAT/P1/P2/P3/P4/etc.)?
  If you're using an newer style Cluster CTRL image (the file /etc/default/clusterctrl exists) please follow Cluster CTRL instructions. On the Cluster ...
• Software / Linux
  How do I resize a disk image (Raspbian SD/USB image)?
  To resize the last partition in a disk image, for example a Raspberry Pi SD card image first increase the ...
• Hardware / Cluster HAT / Cluster CTRL
  Why do I get the fallback IP instead of an IP via DHCP?
  The time dhcpcd waits before using the fallback IP can be set in the configuration file. Edit /etc/dhcpdcd.conf Add a line containing ...
• Hardware / Cluster HAT / Cluster CTRL
  ClusterCTRL: How to write an image to the eMMC?
  To write an image to the eMMC on a Compute Module you need to boot it as a USB Device ...
• Software / Linux / Command Line
  ClusterCTRL: How do I boot a Compute Module from eMMC?
  To boot a Compute Module from the eMMC USBBOOT must be disabled. If your Compute Module doesn't already have a bootable ...
• Software / Linux / Command Line
  ClusterCTRL: How do I USBBOOT a Compute Module?
  To boot a Compute Module as a USB device USBBOOT must be enabled. Background When using ClusterCTRL with Compute Modules "clusterctrl status" ...

• 1
  
• 2
  
• →
  
• ⇥