14 search results

• Hardware / Cluster HAT / Cluster CTRL
  How do I write new firmware to Cluster Stack?
  Control of the ClusterCTRL Stackis done using an ATmega328P (or ATmega328PB), the IC can be reprogrammed using either a standard ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I write new firmware to Cluster Stack
  Control of the ClusterCTRL Stackis done using an ATmega328P (or ATmega328PB), the IC can be reprogrammed using either a standard ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I write new firmware to Cluster Triple?
  Control of the Cluster Triple is done using an ATmega328P (or ATmega328PB), the IC can be reprogrammed using either a standard ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I write new firmware to Cluster Triple
  Control of the Cluster Triple is done using an ATmega328P (or ATmega328PB), the IC can be reprogrammed using either a ...
• Hardware / Cluster HAT / Cluster CTRL
  [LEGACY] Guide to using the RPIBOOT [test] image on the Cluster HAT/Zero Dongle / Zero
  See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone.   Cluster ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I tell a Raspberry Pi to ignore a HAT EEPROM?
  To prevent loading of device tree files (etc) from a HAT EEPROM add the following to the config.txt file in ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I USBBOOT Pi Zero/Pi Zero 2 without SD cards (Cluster HAT/Cluster CTRL)?
  With the Cluster CTRL images (linked from the ClusterHAT website) it's now possible to mix/match booting nodes (Pi Zeros/Compute Modules/A+) ...
• Hardware / Cluster HAT / Cluster CTRL
  ClusterCTRL: How to write an image to the eMMC?
  To write an image to the eMMC on a Compute Module you need to boot it as a USB Device ...
• Software / Linux / Command Line
  How do I stop the HAT EEPROM being loaded on a Raspberry Pi?
  To prevent the device tree configuration from being loaded from a Raspberry Pi HAT add the following to your config.txt ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I update the firmware on ClusterHAT v2.6?
  The ClusterHAT v2.6 uses an ATtiny1616 to emulate the XRA1200P I/O expander, to update the firmware using the built-in UPDI programmer ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I create and copy the SSH key from the Controller Pi to the
  Assuming you haven't already created a public/private key on the Controller Pi run the following. ssh-keygen -t rsa Newer Raspberry Pi OS ...
• Software / Linux
  How do I resize a disk image (Raspbian SD/USB image)?
  To resize the last partition in a disk image, for example a Raspberry Pi SD card image first increase the ...
• Software / Linux / Command Line
  How do I manually install clusterctrl?
  If you're using one of the provided ClusterCTRL images the cluserctrl tool will already be installed but those using the ...
• Software
  How do I disable automount in Raspberry Pi OS (Bullseye with GUI)?
  Create a file ~/.config/pcmanfm/LXDE-pi/pcmanfm.conf for the "default" user (the one created when installed) with the following contents. [volume] mount_on_startup=0 mount_removable=0 autorun=1 After a reboot USB ...