9 search results

• Hardware / Cluster HAT / Cluster CTRL
  [LEGACY] How do I setup usbboot (no SD cards in the Pi Zeros) for the
  See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone. I ...
• Software / Linux / Command Line
  How do I remove all lines from a file up to a keyword?
  To remove all lines up to and including a keyword from a file simply use sed as follows: sed '1,/keyword/d' infile ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I enable autologin on TTY running on the Gadget Mode serial port?
  The Cluster HAT allows you to log into the Pi Zeros via the (Gadget USB) Serial port, sometimes it's helpful ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I enable autologin on TTY running on the Controllers serial port [Raspbian Stretch]?
  To enable auto logins on the TTY running on any serial port on the Controller log in and run the ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I use the solder jumpers on the Cluster HAT?
  Solder jumpers on the Cluster HAT allow you to modify the default behaviour and configuration. To change the configuration you ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I use newer NCM images on older (bookworm) controllers?
  Images dated 2025-11-24-2 and earlier use the ACM+RNDIS protocols for the USB Gadget Ethernet. Images 2025-11-24-3 and later use ACM+NCM. ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I update the firmware on ClusterHAT v2.6?
  The ClusterHAT v2.6 uses an ATtiny1616 to emulate the XRA1200P I/O expander, to update the firmware using the built-in UPDI programmer ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I setup NAT on the WiFi interface on the rpiboot test images?
  WARNING: These steps relate to the OLD test rpiboot (only) images and NOT the current combined images, if you want ...
• Software / Linux / Command Line
  How do I manually install clusterctrl?
  If you're using one of the provided ClusterCTRL images the cluserctrl tool will already be installed but those using the ...