15 search results

• Hardware / Mobile
  Android phone on Three - data has stopped working with 3G.
  On the Three network you must use 3G for data access, sometimes the APN profiles can cause problems and they ...
• Software / Linux
  How do I setup CentOS 7 for KVM Virtualisation with a bridged network [OVH/Hetzner]?
  Coming from a minimal install the first step is to install the required software # yum install net-tools qemu-kvm libvirt virt-install ...
• Hardware / Cluster HAT / Cluster CTRL
  [LEGACY] How do I setup usbboot (no SD cards in the Pi Zeros) for the
  See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone. I ...
• Software / Linux / Manuals
  Manual: vi
  PROLOG This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the ...
• Software / Linux / Command Line
  How do I disable NetworkManager?
  If you want to configure your network devices manually via /etc/network/interfaces you can remove the service. Firtstly configure your network ...
• Software / Linux / Command Line
  How do I use a static network device name for KVM (to graph in Cacti
  To force a static (pre-defined name for a KVM Virtual Machine you will need to edit the configuration file for ...
• Hardware / Cluster HAT / Cluster CTRL
  [LEGACY] Guide to using the RPIBOOT [test] image on the Cluster HAT/Zero Dongle / Zero
  See the current documentation on booting without SD cards, this legacy information is kept here in case it helps anyone.   Cluster ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I change a Cluster HAT image type (Controller/NAT/P1/P2/P3/P4/etc.)?
  If you're using an newer style Cluster CTRL image (the file /etc/default/clusterctrl exists) please follow Cluster CTRL instructions. On the Cluster ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I change a Cluster CTRL image type (Controller/NAT/P1/P2/P3/P4/etc.)?
  If you're using an older style Cluster HAT image (if you have /etc/default/clusterctrl then you're using the new style), follow ...
• Software / Microsoft Windows
  Fixing a blank ipconfig output [Windows XP]
  This came about after installing Panda Software Internet Security 2008 [12.00.00] Resolution Click the Start button and select Run. Enter “cmd” and press ...
• Software / Microsoft Windows
  How do I clear a saved password for a network share?
  To clear a saved password for a network share to allow you to use a new username/password use:   net use \\<sharename> ...
• Hardware / Computers
  How do I boot a Supermicro motherboard using PXE?
  To boot with PXE you must first enable the network cards BIOS within your system BIOS and then when booting ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I setup NAT on the WiFi interface on the rpiboot test images?
  WARNING: These steps relate to the OLD test rpiboot (only) images and NOT the current combined images, if you want ...
• Software / Linux / Command Line
  How do I force apt to connect using IPv4 (or IPv6) only?
  To  connect using IPv4. apt -o Acquire::ForceIPv4=true update Or to use IPv6 only. apt -o Acquire::ForceIPv6=true update ...
• Hardware / Cluster HAT / Cluster CTRL
  How do I use newer NCM images on older (bookworm) controllers?
  Images dated 2025-11-24-2 and earlier use the ACM+RNDIS protocols for the USB Gadget Ethernet. Images 2025-11-24-3 and later use ACM+NCM. ...