Here you can see questions asked by other users. If you answer these questions, your answers may be inserted into the FAQ.
Date / User | Question | |
---|---|---|
2017-08-31 Matha | Software: Is it possible to use the ClusterHAT with SD cards attached to each Pi Zero (x4)? I would prefer to use standard images and then customize per recommendations. | Answer |
2018-03-12 lutz | Cluster HAT: clusterHAT v2.2 
rpiboot with 4 zeros (no W) 
works fine, but no luck using GPIO e.g. 
(sudo) gpio write 21 1 or 0 | Answer |
2018-04-13 Brian | Cluster HAT: How do you get kubernetes running on the controller with a version in which the pi zero nodes can be added? | Answer |
2020-08-21 Masayuki Codec | Cluster HAT: Hi, 
 
I have one cluster hat and one cluster triple connecting to a raspberry pi 2. 
Those are clusterctrl status result. I think it gives me strange result. 
 
pi@cbridge:~ $ clusterctrl status 
clusterhat:1 
clusterctrl:1 
maxpi:7 
ctrl_bus:20:11:3 
hat_version:1.2 
hat_version_major:1 
hat_version_minor:2 
hat_size:4 
hat_uuid:622aef87-17d6-4022-a370-781e1c3fe2b9 
hat_vendor:8086 Consultancy 
hat_product_id:0x0004 
throttled:0x0 
hat_alert:0 
p1:0 
p2:0 
p3:0 
p4:0 
ctrl20:FW:1.3 ADC1:4904mV T1:21.06C 
p1:0 
u1:1 
p2:0 
u2:1 
p3:0 
u3:1 
 
It looks like the nodes name on cluster hat p1 is same as nodes on cluster triple p1. 
How can I change those names ? 
 
Thank you. | Answer |
2022-03-18 joe | Cluster HAT: Can you add support for the zero 2 w to usbboot, please? | Answer |
2022-10-05 Quinn | Hardware: USB PCI Passthrough? 
 
Is it possible to pass a usb port through to one of the Pi Zero's on the clusterhat? | Answer |
2022-12-11 Vítězslav Dvořák | Software: How to reconfigure if I have p1-p4 in first controller, p5-p8 in second, etc. to have a unique MAC address on each controller ? | Answer |